Hello everyone,
Are the con rods and crankshaft the same dimentions for all the engine sizes?
Am I right in thinking the stroke is the same for 700 to 850 engines and the capacity is changed by the liners bore ?
Can i fit 700 cc engine rods in an 850 engine?
Thanks in advance
Andy
Con rod and crankshafts interchangeable?
Moderator: Moderators
-
- Newbie
- Posts: 3
- Joined: Fri Sep 06, 2019 6:56 pm
- amam
- Reliant Geek
- Posts: 1852
- Joined: Mon Jul 28, 2014 6:23 pm
Re: Con rod and crankshafts interchangeable?
no you can't swap them
-
- Know it all!
- Posts: 244
- Joined: Mon Dec 25, 2017 8:54 am
Re: Con rod and crankshafts interchangeable?
The pistons and liners are the same in both engines. 750 will have longer rods and a shorter crank throw I believe. You can swap out the crank and rods but you'll have changed the capacity.
- Atodini
- Super poster
- Posts: 399
- Joined: Mon Jul 28, 2014 8:01 pm
Re: Con rod and crankshafts interchangeable?
You cannot swap a 750 crank with an 850 crank - the main bearings on an 850 are significantly larger than the 750 engines....
Take what Amam said - nothing (except that pistons / liners might be the same on 750 and 850 - I'm pretty sure somebody told me this but it's something I've never tried).....
I do know first hand that 600cc engines are pretty much unique. The 700cc engines were a complete redesign!
John
Take what Amam said - nothing (except that pistons / liners might be the same on 750 and 850 - I'm pretty sure somebody told me this but it's something I've never tried).....
I do know first hand that 600cc engines are pretty much unique. The 700cc engines were a complete redesign!
John
-
- Newbie
- Posts: 3
- Joined: Fri Sep 06, 2019 6:56 pm
Re: Con rod and crankshafts interchangeable?
OK thank for the infomation that plan is dead in the water then
So Im looking for 2 con rods for an 850 engine at an inexpensive price
So Im looking for 2 con rods for an 850 engine at an inexpensive price

-
- Reliant Geek
- Posts: 511
- Joined: Wed Jul 30, 2014 7:35 pm
Re: Con rod and crankshafts interchangeable?
This particular forum is for issues with the working of the forum site, not the cars! Better move your posting to the relevant car forum. Click 'Board Index' below the logo at the top of the page to reveal the list of forums...